AeroEgg AET-H743-BASIC Y3 Configuration and Tuning Guide for Ardupilot Firmware
Frequently Asked Questions
Q: Why does the flight controller fail to detect my GPS when it is connected to UART4? A: Ensure ...
Chapter 1: Flight Controller and Compass Calibration
1. Basic Setup For initial setup of a flying wing, connect the flight controller to the computer ...
Chapter 2: Radio Transmitter Calibration
2. Radio Transmitter Setup 2.1. Radio Transmitter Calibration Refer to the manual for detailed wi...
Chapter 3: VTOL Configuration
3. VTOL Configuration 3.1 Preliminary VTOL Configuration Open the Full Parameter Tree, search for...
Chapter 4: Channel Configuration and Pre-Arm Check Settings
4. Common Configuration and Tuning Parameters Aircraft parameters often need to be changed to acc...
Chapter 5: Channel Configuration, Servo Setup and Inspection, and ESC Calibration
5. Output Setup 5.1 Channel Configuration Open SERVO OUTPUT to configure each flight controller o...
Chapter 6: VTOL Tilt, Multicopter, and Return-to-Launch Parameter Configuration
6. VTOL Parameters 6.1 Tilt-Mechanism Parameters Adjust the following parameters according to the...
Chapter 7: Airspeed Sensor Setup
First-Flight Setup After Installing the Airspeed Sensor 1. ARSPD_TYPE = 1 (the other parameters b...
Chapter 8: VTOL, Transition, and Fixed-Wing Testing
8. VTOL Testing 8.1 Multicopter Feedback Logic Check Complete the flight controller self-test and...