Search Results

Procedure for configuring the AeroEgg H743 9VSW 9V video power switch 1. Configure the relay function ◦ Parameter: RELAY1_FUNCTION ◦ Value: 1 ◦ Function: Enables relay output 1 2. Assign the relay pin ◦ Parameter: RELAY_PIN ◦ Value: 81 ◦ Function: Selects th...

U7 Flight Controller AGC Configuration and Tuning Guide I. Identify the Airframe Type II. Flash the Firmware III. Peripheral Wiring and Configuration IV. Basic Flight Controller Configuration and Tuning V. Flight Mode Setup VI. Detailed Parameters for Each Fli...

Thank you for being with us throughout the journey. AeroEgg Technology is always here for you. We appreciate your trust and remain committed to your choice. We will continue serving every customer with care. We are honored by your recognition and fortunate to ...

The AeroEgg AET F405A WING flight controller currently supports ArduPilot and INAV firmware. This guide focuses on fixed-wing configuration and tuning with ArduPilot firmware. The flight controller can be upgraded to the latest firmware by flashing a firmware ...

The AeroEgg AET F405A WING flight controller wiring diagram is shown below: Common peripherals include GPS positioning modules, SBUS receivers, ELRS receivers/TBS CRSF receivers, digital air units (including DJI O3, O4, and Vista; Caddx Avatar series; and open...

Section 1: Connect the Ground Station and Reset Default Parameters. Open the AGC configuration and tuning software. Connect the flight controller to the computer with a Type-C data cable. In the upper-right corner of AGC, select the port assigned to the fligh...

When using the Full Parameter List, keep the configuration and tuning reference TXT file open on the computer. Copy a parameter name from the reference file and paste it into the Search box on the right side of the Full Parameter List. The page automatically ...

Open the OSD information settings:

[](https://doc.aeroeggtech.com/en/uploads/images/gallery/2026-04/image-1777296476516.png Return to the Output page and confirm that Serial6, which corresponds to the Bluetooth module, is configured correctly as shown above. 2: Disconnect the USB cable and con...

Section 3: RSSI Configuration

Installation After connecting the devices to the flight controller, configure the corresponding ports, baud rates, and other settings in the ground station. Parameter Overview This section defines the output devices and the corresponding motors to connect. ...

In this example, the receiver is connected to port 4, so the corresponding port must be configured in the ground station. Set port 4 to RCIN with a baud rate of 115200. The wiring diagram is shown below. Channel 9 is configured here to switch flight modes. De...

Install the flight controller and GPS correctly on the airframe before performing compass calibration.

The following section explains how to use AGC for rapid parameter configuration. After you understand the workflow and underlying principles, you can download configuration files from the internet and adapt parameters created by other users.